Learning About Plumbing For Residential Dwellings

Troubleshooting Your Hot Water Dispenser

Having access to hot water on demand is a convenience that modern homeowners often take for granted. Your home relies on an intricate series of plumbing components to deliver hot water when you need it most. One of these components is the hot water dispenser, which is located at the tap.

When the hot water dispenser malfunctions, you will need to make repairs in order to restore your home's access to hot water through the affected tap. Here are three tips that you can use to successfully troubleshoot your broken hot water dispenser in the future.

1. Check for proper power.

Your hot water dispenser will need access to power in order to function properly. If there is a disruption in the flow of electricity coming into the appliance, you will not be able to access the hot water you desire.

Check underneath your sink to locate the wall socket your hot water dispenser should be plugged into. Make sure the plug is firmly inserted and that the outlet is functioning properly to determine if a power problem is causing your lack of hot water.

2. Reset the overload switch.

Modern hot water dispensers are equipped with an overload switch that is designed to protect their sensitive electronic components from damage during a sudden burst of electricity. If your home has recently experienced an electrical surge, the overload switch could need to be reset in order to restore functionality to your hot water dispenser.

Look for the overload switch on the appliances' exterior housing and reset it by switching it to the off position and then back to the on position. If your hot water dispenser doesn't have a visible reset switch, you will need to locate the overload fuse inside the appliance and replace it to reset the switch properly.

3. Clean the faucet screen.

In order to prevent impurities from contaminating your home's water supply, your hot water dispenser is equipped with a faucet screen that eliminates contaminants. Over time, mineral deposits and other particles can adhere to the faucet screen, closing off the small holes through which hot water should pass.

When your faucet screen gets too dirty, it can affect the flow of hot water coming from your hot water dispenser. Soak the screen in a solution of vinegar and scrub with a soft brush to eliminate any buildup.

Being able to troubleshoot your hot water dispenser will ensure you always have access to the hot water you need within your home. Contact a company, like First Class Water Heaters Inc, for more help.